Grizzly T32339 Owner'S Manual Download

Page: 24 / 48

-22-

Model T32339 (Mfd. Since 03/21)

2. Push coupler sleeve toward compressor,

then insert air hose male plug into quick-
connect coupler (see

Figure 25).

Note:

When plug is fully seated, coupler will

automatically lock it in place.

Figure 25. Plug inserted into coupler.

3. Connect other end of hose to air tool.

Note:

Refer to air tool instructions for speci-

fications, method of connection, and proper
use of tool.

Plug

Quick-Connect

Coupler

To connect air tool:

1. Turn regulator knob (see Figure 24) all the

way counterclockwise.

Regulator

Knob

Figure 24. Location of regulator knob.

Disconnecting Air Tool

To disconnect air tool:

1. Turn regulator knob (see Figure 24) all the

way counterclockwise.

2. Disconnect air tool from hose.

3. Push coupler sleeve toward compressor to

release hose plug (see

Figure 26).

Note:

Air will escape when connection is bro-

ken if tank is still pressurized.

Figure 26. Pushing coupler sleeve to release

plug.

Plug

Coupler

Sleeve

Eye injury hazard! Always

wear safety glasses when

handling pressurized air

system.

Pressurized air escaping through valves/

fittings can be extremely loud. Protect

hearing with ANSI-approved hearing

protection in following steps.

Coupler

Sleeve

Summary of Contents for T32339

















































Search results

Summary of Contents for T32339

Reviews:

Related manuals for T32339

Brands by name

Popular brands

Grizzly T32339, Owner'S Manual

Search results

Summary of Contents for T32339

Reviews:

Related manuals for T32339

Brands by name

Popular brands