Grizzly T28523, Owner'S Manual

Page: 16 / 32

-14-
Model T28523 (Mfd. Since 05/19)
Assembly
3. Attach safety shields with brackets to grinder
with (2) M6-1 x 14 hex bolts, (2) clamping brack-
ets, and (2) 6mm washers (see
Figure 12).
Figure 13. Example tool rest assembly (left).
Tool Rest
Tool Rest
Bracket
Knob
Bolt
Flat
Washer
4. Assemble left tool rest using (1) left tool rest
bracket, (1) left tool rest, (1) 6mm flat washer,
and (1) M6-1 x 16 knob bolt (see
Figure 13).
5. Assemble right tool rest using (1) right tool
rest bracket, (1) right tool rest, (1) 6mm flat
washer, and (1) M6-1 x 16 knob bolt (see
Figure 13).
Figure 12. Safety shield with bracket attached to
grinder.
To assemble grinder:
1. Attach spark deflectors to grinder with
(4) M5-.8 x 10 Phillips head screws with
washers (see
Figure 10).
2. Loosen hex bolts attached to underside
of safety shields. Slide safety shields onto
safety shield brackets with magnifier on left
bracket (see
Figure 11). Re-tighten hex
bolts.
Figure 11. Left safety shield with hardware and
bracket.
Hex Bolt
Safety Shield
Bracket
Figure 10. Spark deflector attached to grinder.
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
Bracket