background image

-12-

T28000 T28922 T28923 (Mfd. Since 11/18)

Grizzly Industrial, Inc. warrants every product it sells for a period of 

1 year to the original purchaser from 

the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, 
negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty 
and any and all warranties that may be implied by law, including any merchantability or fitness, for any par-
ticular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent 
that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. 
In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and 
any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.

We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special, 
or consequential damages arising from the use of our products.

To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then 
issue you a “Return Number,’’ which must be clearly posted on the outside as well as the inside of the 
carton.  We  will  not  accept  any  item  back  without  this  number.  Proof  of  purchase  must  accompany  the 
merchandise. 

The manufacturers reserve the right to change specifications at any time because they constantly strive to 
achieve better quality equipment. We make every effort to ensure that our products meet high quality and 
durability standards and we hope you never need to use this warranty.

Please feel free to write or call us if you have any questions about the machine or the manual. 

Thank you again for your business and continued support. We hope to serve you again soon.

WARRANTY AND RETURNS

Summary of Contents for T28000













Reviews: