Model t23091
1
⁄
4
" Air die grinder
-6
-
your tool was carefully packaged for safe
transportation. remove the packaging
materials from around your tool and inspect
it. if you discover the tool is damaged,
please immediately call Customer Service
at (570) 546-9663 for advice.
save the containers and all packing
materials for possible inspection by the
carrier or its agent. otherwise, filing a
freight claim can be difficult. When you are
completely satisfied with the condition of
your shipment, inventory the contents.
if any non-proprietary parts are missing
(e.g., a nut or a washer), we will gladly
replace them; or for the sake of expediency,
replacements can be obtained at your
local hardware store.
model t23091 inventory (figure 2)
a. die grinder .........................................1
b. Quick disconnect Air Fitting ...............1
c. Bottle for oil .......................................1
d. spindle Wrench
1
⁄
2
" ............................1
e. Collet nut Wrench
11
⁄
16
" ......................1
section 2: setup
unpacking
inventory
figure 2. inventory.
a
b
c
e
d
assembly
to assemble the grinder:
1. remove the plastic plug from the
grinder air inlet.
2. Apply pipe sealant on the quick
disconnect fitting threads, and install
the fitting into the grinder air inlet.
3. insert the shank of the desired grinding
bit into the collet until it bottoms, and
tighten the collet nut (see
figure 1)
using the spindle and collet wrenches.
4. release the trigger lock, depress the
trigger, place a few drops of air tool
oil into the air inlet, and release the
trigger. the grinder is ready for use.
air supply setup tips:
•
if the air hose is longer than 25-feet,
increase the air pressure to 100 psi to
compensate for air flow restriction.
•
For consistent air flow, use air hoses
with an inside diameter of
3
⁄
8
" or larger.
•
to eliminate air system moisture and
maintain automatic lubrication, install a
main or in-line filter water separator as
far as possible from the air compressor,
but before any automatic in-line oiler.
see examples in
figure 3.
Fittings
Water
Separator
Air
Regulator
Automatic
Oiler
Main Air
Supply Hose
Male Female
Air Piping
Filter
In-Line
Your
Tool
Oiler
Filter
Regulator
Quick-Disconnect
Lead-In Hose
(Optional)
(Optional)
Steel
Compressor
figure 3. typical air supply system.
