t23086 (Mfg since 11/10)
-2
-
7. avoid entanglements. Do not
wear loose clothing, gloves, neck-
ties, rings, bracelets, or other jewel-
ry, which may get caught in moving
parts, when operating this tool. Wear
a protective hair covering to contain
long hair.
8. use correct air pressure.
Exceeding the maximum psi rating
of this tool may cause unpredictable
operation or bursting.
9. disconnect air pressure
before servicing, changing accesso-
ries, or moving to another location.
never leave this tool unattended
when connected to air.
10. secure tooling. always verify
tooling is secure before operation.
11. sharp surfaces. Do not
place hands near the tooling sur-
faces when in operation.
12. remove adJusting Keys and
Wrenches after use. these
tools become dangerous projectiles
if left on the tool when it is started.
13. avoid flammables. Do not use
this tool around any flammables that
may be ignited by sparks.
14. secure WorK. use clamps or a
vise to hold work when practical. it is
safer than using your hand and frees
both hands to operate tool.
15. maintain tools With care.
Keep tools lubricated and clean
for best and safest performance.
Follow instructions for lubricating
and changing accessories.
16. do not force tool. it will do
the job better and safer at the rate
for which it was designed.
17. checK for damaged parts
before using. Check for bind-
ing and alignment of parts, broken
parts, part mounting, loose bolts,
and any other conditions that may
affect operation. repair or replace
damaged parts before operating.
18. use good lighting. Keep work
area well lighted. Dark work areas
increase risk of accidental injury.
19. avoid
unintentional
operation. always disconnect air
when not in use, and do not carry
tool with hand on trigger.
20. use
the
recommended
accessories. Consult owner’s
manual for recommended acces-
sories. using improper accessories
may increase the risk of injury.
21. never alloW untrained
users to use this tool While
unsupervised.
22. if you are unsure of the
intended operation, stop
using tool. seek formal training
or research books or magazines that
specialize in pneumatic tools.
23. be aWare of hose location.
hoses can easily become a tripping
hazard when laid across the floor in
a disorganized fashion.
24. do not use under the
influence of drugs or
alcohol, or When tired.
like all machinery there is potential danger when operating
this machine. accidents are frequently caused by lack of
familiarity or failure to pay attention. use this machine with
respect and caution to lessen the possibility of operator
injury. if normal safety precautions are overlooked or ignored,
serious personal injury may occur.
