t23084 (Mfg since 11/10)
-1
-
safety instructions for pneumatic tools
1. read this manual. this tool may
cause personal injury if used incor-
rectly. this manual contains proper
safety and operating instructions that
must be followed to reduce this risk.
2. Wear eye protection. this
tool may throw small fragments dur-
ing operation, which may cause seri-
ous eye injury. always wear ansi
approved safety glasses or face shield
to reduce your risk from this hazard.
3. Wear a respirator. this tool
may produce fine dust during oper-
ation, which can cause respiratory
injury if inhaled. always wear a respi-
rator niosh approved for the type of
material being processed.
for your own safety read instruction manual
before operating this equipment
the purpose of safety symbols is to attract your attention to possible hazardous
conditions. this manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. the
progression of symbols is described below. remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
it may also be used to alert against unsafe practices.
indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
indicates an imminently hazardous situation which,
if not avoided, Will result in death or serious injury.
this symbol is used to alert the user to useful
information about proper operation of the equipment.
safety
NOTICE
4. Wear hearing protection.
operating this tool for prolonged time
periods may damage your hearing.
your risk depends on length and fre-
quency of use. to reduce your risk of
this hazard, wear hearing protection.
5. maintain safety guards. your
tool may be equipped with safety
guards or other structural compo-
nents designed to reduce the risk of
injury during operation. never modify
or operate this tool with any guards or
components removed or damaged.
6. Keep children aWay. prevent
children from injury by keeping them
away from this tool. Disconnect and
lock the tool away when not in use.
