T1238 Tool Table (Mfd. Since 10/17)
-5-
Moving Tool Table
Mounting Machines to Table
The Model T1238 Mobile Tool Table is designed
to have machines mounted to it. Mount the
machines to the table top with applicable hard-
ware (not included).
DO NOT mount machines with high centers
of gravity (like table-top drill presses or
mortising machines) on this table. Doing
so could cause the table to tip and fall,
resulting in serious injury or death.
Failure to properly mount machines to
table can cause tipping resulting in injury
property damage.
The strongest mounting option is a "Through
Mount" (see
Figure 15) where holes are drilled
all the way through the table, and hex bolts,
washers, and hex nuts are used to secure the
machine in place.
Machine Base
Table Top
Hex
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
Figure 15. Through mount example.
Depress the lifting pedal to raise the table onto
the wheels. Carefully steer the table to the desired
location, then depress the smaller linkage pedal
to lower the unit onto its feet (see
Figure 16).
Any abrupt movement could cause the unit
to tip, resulting in serious personal injury
and property damage.
Figure 16. Moving controls.
Lifting
Pedal
Linkage
Pedal
