T1238 Tool Table (Mfd. Since 10/17)
-3-
6. Attach (2) upper braces and shelf to side
assembly A with (6) M8-1.25 x 12 car-
riage bolts and (6) M8-1.25 flange nuts
(see
Figure 7).
7. Attach (2) lower braces to side assembly A
with (2) M8-1.25 x 16 button head cap screws
and (2) M8-1.25 flange nuts (see
Figure 7).
10. Turn table assembly upside down.
11. Loosely attach linkage bar to wheel assem-
bly with (1) M8-1.25 x 20 hex bolt and
(1) M8-1.25 lock nut to allow movement.
Connect extension spring to linkage bar and
wheel assembly (see
Figure 9).
12. Loosely attach linkage bar to pedal assem-
bly with (1) M8-1.25 x 20 hex bolt and (1)
M8-1.25 lock nut to allow movement (see
Figure 10).
8. Attach side assembly A to side assembly
B with (6) M8-1.25 x 12 carriage bolts and
(6) M8-1.25 flange nuts (see
Figure 8).
9. Attach side assembly B to lower braces with
(2) M8-1.25 x 16 button head cap screws and
(2) M8-1.25 flange nuts, as shown in
Figure
8.
Figure 8. Side assembly B attached.
x 2
x 6
Side Assembly A
Side Assembly B
x 6
x 2
Figure 9. Linkage and spring installed.
x 1
Extension Spring
Linkage Bar
Wheel Assembly
Figure 10. Linkage bar attached to pedal
assembly.
x 1
Linkage
Bar
Figure 7. Upper/Lower braces and shelf
attached to side assembly A.
x 2
Side Assembly A
Shelf
x 6
Lower
Brace
Upper
Brace
