Model T10814 (Mfd. Since 5/15)
-23-
Slides
The position of the tool holder is controlled by two
dovetailed slides: a cross slide and a carriage
slide. Each slide is equipped with a gib lock to
provide added rigidity during grinding operations.
(For further details, see
Gib Adjustment on
Page 31.)
Cross Slide
The cross slide moves the tool holder toward and
away from the grinding wheel. It is positioned by
rotating the cross slide adjustment wheel (see
Figures 16–17) and can be secured using the
gib lock.
Carriage Slide
The carriage slide moves the tool holder left and
right, parallel to the grinding wheel. It is posi-
tioned by rotating the adjustment knob (
Figure
17) and can be secured with the gib lock.
Tool Holder
The tool holder contains a quill that holds tool-
ing during operations. The quill uses a collet that
accepts the tooling, which is then secured by a
threaded handwheel at the back of the quill.
The tool holder is equipped with an index ring
(see
Figure 18) that is graduated in degrees. The
ring rotates the quill inside the tool holder so that
the tooling can be positioned precisely along a
360
˚
arc.
Graduated Index Ring
The selection lever at the top of the tool holder
controls the movement of the ring and quill.
When positioned to the left, the lever allows the
quill to spin freely in either direction.
When positioned in the middle, the lever allows
the quill to spin exactly 180
˚
from a fixed point.
When positioned to the right, the lever locks the
quill in place.
To reposition index ring:
1. Twist lock ring to left until index ring moves
freely and does not engage quill.
2. Twist index ring to desired position.
3. Retighten lock ring.
Figure 16. Location of cross slide adjustment
wheel.
Figure 17. Locations of cross slide and carriage
controls.
Carriage
Gib Lock
Figure 18. Location of index ring and selection
lever.
Lock Ring
Index Ring
Cross Slide
Adjustment Wheel
Selection Lever
Carriage
Adjustment Knob
Cross Slide Gib Lock
Handwheel
Summary of Contents for T10814
Page 40: ...38 Model T10814 Mfd Since 5 15...
Page 44: ......