model t10010 (mfg. since 3/10)
-17
-
here are some tips for using the wet
grinder water reservoir:
•
Check the water level before every use
and be sure the wheel is wet before
you begin grinding. DO NOT use the
grinder without water.
•
Leaving the grinding wheel stored in
water will cause damage to the wheel
and create potential hazards because
the wheel will become unbalanced.
Once any grinding process is complete,
return the reservoir to the storage posi-
tion to prevent prolonged water expo-
sure to the wheel.
•
Empty, rinse, and refill the reservoir
regularly. This prevents metal and
stone from accumulating in the reser-
voir.
•
Place a magnet in the reservoir to catch
and collect metal filings. This will help
prevent excessive metal accumulation
on the grinding wheel.
angle guide
The Model T10010 Wet Grinder comes
with an angle guide to help identify and
maintain the cutting angle on a variety of
tools.
2. Find the angle notch that best fits the
tool you wish to grind by placing the
sharpened edge of the workpiece into
each notch.
3. Place the angle guide on the wheel
with the desired angle notch (found in
step 2) against the wheel and adja-
cent to the universal support (see
figure 14).
do not allow the grinding wheel
to stay immersed in water for long
periods of time without running.
the water can cause the wheel to
become waterlogged and unbal-
anced and may cause sections of
the wheel to break off when the
grinder is started. always empty or
lower the reservoir to the storage
position after operations.
to use the angle guide:
1. Locate the eight measuring notches on
the angle finder (see
figure 13).
4. Adjust the positioning of the tool and
the universal support height as neces-
sary so that the sharpened edge of the
tool is flat against both the grinding
wheel and the angle edge on the angle
guide, as shown in
figure 14.
note:
For precision grinding, use the
provided grinding jig (see
Page 14).
figure 13.
measuring notches.
angle edge
desired
angle Notch
measuring
Notches
Workpiece
figure 14.
angle guide usage.
desired
angle Notch
Correct
grinding angle
angle edge
Workpiece
