5.5. Heat-conductive foil
On both transistors stick enclosed heat-conducting foils. Foils are self-adhesive, is necessary to remove protective
foil from them - from both sides.
Pict. 5: Removing the protective foils from the heat-conducting foils and their placing, gearbox check
5.6. PSJ-VZ58 installation
Insert your unit to original position on gearbox. If unit doesn’t fit on gearbox you can adjust it by rasping. After
your unit is placed you must check for any conductive contacts with gearbox. If there are some conductive
contacts you have to remove them, for example by rasping the unit or your gearbox
,
or you can use an insulating
material. Bottom side of unit is insulated by pre-installed insulation foil.
Pict. 6: Installing new processor unit on gearbox
Summary of Contents for PSJ-VZ58 gen3 OEM
Page 1: ......
