Content:
1.
GEN.3 updates overview
2.
General information
3.
Functions overview
4.
Technical parameters
5.
PSJ installation
6.
Fire modes and programming
7.
Troubleshooting
8.
Package contents
1. GEN.3 news overview
•
simplified unit installation
•
simplified magnet installation – polarity doesn’t affect functionality
•
lower energy consumption, as low as 3.9mA
•
can be used with spring up to M200 with rate of fire 99rpm
•
longer wires, suitable for all replica types
•
adjustable rate of fire
•
adjustable active brake with possibility to be completely disabled
•
compatible with batteries up to 4S / 16.8V
•
a screw added to accessories to attach the unit into the gearbox
•
new, thicker insulation foil preventing short circuit
•
possible usage of dual sector gears
•
layered varnish coating preventing short circuit
•
new service connector
2. Basic information
New generation of PSJ processor unit brings many new functions and easier installation. All the great function of
previous generations are kept - contactless magnetic switching, powerful MOSFET cooled via the whole gearbox,
active brake fully functional in any mode, programmable burst and so on.
On top of that the active brake is now adjustable up to completely disabled, we’ve added advanced rate of fire
settings, energy consumption is now as low as 3.9mA and there are many more new features and updates.
Generation 3 units are suitable for AEG replicas according to the version of gearbox each unit is designed for.
Units have been tested in gearboxes of following manufacturers*:
AimTop, APS, ARES, ASG Ultimate, Cyma, DBoys, Guarder, RetroArms, SHS, SRC
*Every manufacturer innovates their products over the time, so there is possibility, that the gearbox tested by us is different from yours. However
this only means, that your installation might require some minor adjustments.
3. Functions overview
3.1. Fire modes
•
6 pre-set fire modes
•
configurable burst mode - from 1 up to 255 BBs shot on one quick trigger pull, this setting works in all
modes containing burst
•
automatically switches from burst to full auto when trigger pulled for longer time, without any delay
•
modes are fully programmable by the trigger (see figure 6.2.)
3.2. Rate of fire
•
allows you to set delay between the two following shots
•
allows smooth rate of fire setting
•
programmable by trigger (see figure 6.2.)
3.3. Special functions
•
default settings reset: You can simply reset all settings to their default values by trigger (see figure 6.2.)
•
manual mode: If your PSJ indicates damage and you are sure it is not mechanical and your replica is able to
shoot, you can access manual mode in which malfunction is ignored. You can then fire on full auto mode
only (see figure 6.4).
•
WARNING! By poor judgement, you can cause more damage to your replica and the unit!
Summary of Contents for PSJ-M3 gen3
Page 1: ......
