Model h7668 spray gun w/pressure Cup
-7
-
section 2: introduction
if you have any comments regarding this
manual, please write to us at the following
address:
grizzly industrial, inc.
C/o technical documentation
p.o. Box 2069
Bellingham, Wa 98227-2069
Most importantly, we stand behind our
tools. if you have any service questions or
parts requests, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pa 17756
phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web site: http://www.grizzly.com
We are proud to offer the grizzly Model
h7668 spray gun. this model is part
of a growing grizzly family of fine tools.
When used according to the guidelines set
forth in this manual, you can expect years
of trouble-free, enjoyable operation, and
proof of grizzly’s commitment to customer
satisfaction.
the Model h7668 is designed to be used
for bigger jobs where large volumes of
material are needed and greater painter
mobility is required. the two quart capacity
allows the painter to spray with one hand
and carry the pressure cup with the other.
it is our pleasure to provide this manual
with the Model h7668. it was written
to encourage safety considerations and
guide you through general operating pro-
cedures and maintenance.
the specifications, details, and photo-
graphs in this manual represent the Model
h7668 as supplied when the manual was
prepared. however, owing to grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of grizzly.
read the manual before operation.
become familiar with this spray gun,
its safety instructions, and its opera-
tion before beginning any work.
serious personal injury may result if
safety or operational information is
not understood or followed.
foreword
contact info
tool data
type ..................................pressurized Cup
Fluid tip .......................................... 1.8 mm
air Consumption ............................8.8 CFM
inlet air pressure ........2-3 Bar /29-43.5 psi
air hose inlet ..................................
1
⁄
4
" npt
Fluid hose inlet ...............................
3
⁄
8
" nps
Material Capacity ................................. 2 qt.
Summary of Contents for H7668
Page 2: ......
