-16-
g9298/g9299/g9300 rotary table
H2939—4 piece Edge finder Set
Four different styles to cover any setup problem!
set includes one each: a
3
⁄
8
" diameter with a
point, a combination
3
⁄
8
" diameter with a point and
a 0.200" shoulder, a
1
⁄
2
" diameter with a 0.200"
shoulder, and a combination
1
⁄
2
" diameter with a
0.200" shoulder and a 0.500" shoulder.
figure 16. h2939 4-pc. edge Finder set.
G9296—Adjustable Tailstock
For 8" and 10" rotary tables
G9297—Adjustable Tailstock
For 12" rotary tables
When used with your rotary table and mill, these
adjustable tailstocks provide the support you
need for those longer workpieces. Clamps to your
mill table with standard clamping hardware and
allows precise and accurate adjustments.
figure 17. Adjustable tailstock.
G9295—Dividing plates
When used with your rotary table, these dividing
plates provide a higher degree of precision in hole
placement, spot facing, and even gear making.
figure 18. g9295 dividing plates.
H8370—power feed for Mills
if you want to get the most out of your mill, you
really need a power feed. this power feed comes
with everything required to start milling with exact
control. Comes supplied with a mounting bracket,
gear, auto-stop limit switch with moveable stop
pins, gear guard, and motor. specs: 0–140 rpM,
200 rpM rapid switch, 440 in/lb. maximum torque,
110V 60hz motor, 4:1 bevel drive gear.
figure 19. h8370 power Feed.
