G1182 6" Heavy-Duty Jointer
-7-
IV. UNPACKING
The Model G1182 6'' Jointer is shipped from the
manufacturer in a carefully packed carton. If you
discover the machine is damaged after you’ve
signed for delivery,
please call Customer Service
immediately for advice.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
V. PIECE INVENTORY
After all the parts have been removed from the
carton, you should have:
• Jointer Assembly
• Fence Assembly
• Stand and Chute Assembly
• Motor and Switch Assembly
• Hardware
Hardware
Qty
Motor Pulley
1
Setscrews
2
Metric Wrench 8/10mm
1
Metric Wrench 12/14mm
1
Flat Washers
3
⁄
16
"
38
Machine Screws #10 - 24 x
3
⁄
8
"
38
Hex Bolts
5
⁄
16
" - 18 x
3
⁄
4
"
4
Hex Nuts
5
⁄
16
"
4
Flat Washers
5
⁄
16
"
8
Hex Bolts
3
⁄
8
" - 16 x
3
⁄
4
"
3
Lock Washers
3
⁄
8
"
3
Allen
®
Wrench 3mm
1
V-Belt
1
Knife Setting Jig
1
Tilt Lever
1
Knob
1
Locking Screw
1
Flat Washer
1
⁄
2
" 1
Special Nut
1
The G1182 is a heavy machine, 215 lbs. ship-
ping weight. DO NOT over-exert yourself
while unpacking or moving your machine –
get assistance. Serious injury could occur if
proper lifting procedures are not followed. In
the event that your Jointer must be moved
up or down a flight of stairs, be sure that the
stairs are capable of supporting the com-
bined weight of people and the machine.
Save all containers and packing materials
until you are satisfied that your jointer is in
good condition. Freight company adjusters
will want to inspect those materials in the
event that a freight claim must be made.
In the event that any non-proprietary parts
are missing (e.g. a nut or a washer), we
would be glad to replace them, or, for the
sake of expediency, replacements can be
obtained at your local hardware store.
