background image

Grizzly Imports, Inc. warrants every product
it sells for a period of 

1 year

to the original

purchaser from the date of purchase. This
warranty does not apply to defects due
directly or indirectly to misuse, abuse, negli-
gence, accidents, repairs or alterations or
lack of maintenance. This is Grizzly’s sole
written warranty and any and all warranties
that may be implied by law, including any
merchantability or fitness, for any particular
purpose, are hereby limited to the duration
of this written warranty. We do not warrant
or represent that the merchandise complies
with the provisions of any law or acts unless
the manufacturer so warrants. In no event
shall Grizzly’s liability under this warranty
exceed the purchase price paid for the prod-
uct and any legal actions brought against
Grizzly shall be tried in the State of
Washington, County of Whatcom.

We shall in no event be liable for death,
injuries to persons or property or for inci-
dental, contingent, special, or consequential
damages arising from the use of our prod-
ucts.

To take advantage of this warranty, contact
us by mail or phone and give us all the
details. We will then issue you a “Return
Number” which must be clearly posted on
the outside as well as the inside of the car-
ton. We will not accept any item back with-
out this number. Proof of purchase must
accompany the merchandise. 

The manufacturers reserve the right to
change specifications at any time because
they constantly strive to achieve better qual-
ity equipment. We make every effort to
ensure that our products meet high quality
and durability standards and we hope you
never need to use this warranty.

Please feel free to write or call us if you have
any questions about the machine or the
manual. 

Thank you again for your business and con-
tinued support. We hope to serve you again
soon.

SECTION 6 — WARRANTY INFORMATION

Summary of Contents for G1131













Reviews: