Grizzly G1071, Owner'S Manual

Page: 32 / 40

-30-
Model G1071 (Mfd. Since 11/10)
Symptom Possible Cause Possible Solution
Deep sanding
grooves or scars in
workpiece.
1. Sanding sleeve too coarse for the desired
finish.
2. Workpiece sanded across the grain.
3. Too much sanding force on workpiece.
1. Use a finer grit sanding sleeve.
2. Sand with the grain.
3. Reduce pressure on workpiece while sanding.
Grains rub off the
sanding sleeve.
1. Sanding sleeve has been stored in an
incorrect environment.
2. Sanding sleeve has been folded or
smashed.
1. Store sanding sleeve away from extremely
temperature and humidity.
2. Store sanding sleeves separately and not folded or
flat.
Sanding surfaces
clog quickly or
burn.
1. Too much pressure against sleeve.
2. Sanding softwood.
1. Reduce pressure on workpiece while sanding.
2. Use different stock. Or, accept the characteristics
of the stock and plan on cleaning/replacing belts
frequently.
Sanding Operations