-60-
Model G1014Z/G1014ZX (Mfd. Since 08/22)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
G1014ZX Labels & Cosmetics
60V2
61
67V2
79V2
104
129
130
131
63
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
G1014ZX
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
ABRASION
INJURY HAZARD!
DO NOT touch moving
sanding belt or disc,
or personal injury may
occur!
MODEL G1014ZX
6" X 48" BELT/9" DISC COMBO SANDER w/CABINET
WARNING!
To reduce risk of serious personal injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Support workpiece with miter gauge, backstop, or worktable.
5. Maintain 1/16" maximum clearance between table and sandpaper.
6. Never touch moving sandpaper.
7. Always sand in accordance with directional arrows on machine.
8. Make sure sander is properly assembled, adjusted, and stable before operating. Only operate with all guards in place.
9. Never sand pointed stock with point facing into sanding rotation, and never force workpiece into sanding surface.
10. Only remove jammed pieces when sandpaper is stopped.
11. Turn motor OFF and disconnect power before changing sandpaper, making adjustments, or servicing.
12. Do not wear loose clothing, gloves, jewelry, or other articles that can get entangled. Tie back long hair and roll up sleeves.
13. Never reach over moving sanding disc or belt.
14. Do not expose to rain or use in damp locations.
15. Do not operate under influence of drugs or alcohol, or when tired.
16. Prevent unauthorized use by children or untrained users; restrict access or disable machine when unattended.
Motor: 3/4 HP, 110V/220V, 1-Phase, 60 Hz
Prewired Voltage: 110V
Full Load Amps: 12A (110V); 6A (220V)
Belt Arm Tilt: 0–90°
Sanding Belt Size: 6" x 48"
Sanding Belt Speed: 1900 FPM
Table Tilt: 0–45°
Sanding Disc Diameter: 9"
Sanding Disc Speed: 2420 RPM
Weight: 117 lbs.
Mfd. for Grizzly in Taiwan
Date
S/N
Specifications
79V2
121
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
60V2
P1014ZX060V2
MACHINE ID LABEL V2.08.22
104
P1014ZX104 GRIZZLY NAMEPLATE- SMALL
61
P1014ZX061
MODEL NUMBER LABEL
121
P1014ZX121 ENTANGLEMENT LABEL
63
P1014ZX063
Z-SERIES LABEL
129
P1014ZX129 TOUCH-UP PAINT, GRIZZLY GREEN
67V2
P1014ZX067V2
COMBO WARNING LABEL V2.08.22
130
P1014ZX130 TOUCH-UP PAINT, GREY PUTTY
79V2
P1014ZX079V2
ELECTRICITY LABEL V2.08.22
131
P1014ZX131 TOUCH-UP PAINT, GLOSSY BLACK
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
