Model G1014Z/G1014ZX (Mfd. Since 08/22)
-43-
SECTION 6: MAINTENANCE
Cleaning the Model G1014Z G1014ZX is relatively
easy. Vacuum excess wood chips and sawdust,
and wipe off the remaining dust with a dry cloth.
If any resin has built up, use a resin dissolving
cleaner to remove it.
Protect the unpainted cast iron table by wiping
it clean after every use—this ensures moisture
from wood dust does not remain on bare metal
surfaces. Keep the table rust-free with regular
applications of products like G96
®
Gun Treatment,
SLIPIT
®
, or Boeshield
®
T-9.
Cleaning &
Protecting
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
G5562—SLIPIT
®
1 Qt. Gel
G5563—SLIPIT
®
12 Oz. Spray
G2870—Boeshield
®
T-9 4 Oz. Spray
G2871—Boeshield
®
T-9 12 Oz. Spray
H3788—G96
®
Gun Treatment 12 Oz. Spray
Figure 81. Recommended products for protect-
ing unpainted cast iron/steel parts on machinery.
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
•
Loose mounting bolts.
•
Damaged sanding belt or disc.
•
Worn or damaged wires.
•
Any other unsafe condition.
After Each Use
•
Clean any shavings and dust from between
platen and belt.
•
Sweep surrounding dust and shavings.
•
Clean/protect table.
Weekly Maintenance
•
Sweep or vacuum dust and shavings from
inside belt compartment and inside machine
base.
Monthly Check
•
Check and lubricate table support rod.
•
V-belt tension, damage, or wear.
•
Sanding belt tension.
Annually
•
Check and lubricate rocker plate.
Schedule
