Grizzly G0922, Owner'S Manual

Page: 29 / 56

Model G0922 (Mfd. Since 07/20)
-27-
Stopping the print saves a version of the G-code
and exits the print menu completely. The print
can be resumed from the saved G-code file. Use
stop when leaving the printer unattended for an
extended period of time.
5. Press "Confirm" icon. Print status screen will
open (see Figure 32), axes will home, then
printing will begin.
Figure 32. Print status screen.
To stop print:
1. Press "Option" icon on print status screen.
Print settings menu will open (see
Figure
34).
2. Press "Stop" icon (see Figure 34).
Confirmation menu will open.
3. Press "Confirm" to stop print. A file called
"GRIZZLY.G" will be saved to the SD card.
Note: Stopping a print always saves to
GRIZZLY.G file and will overwrite previous
version of the file.
Pausing Print
While paused, the print head holds position and
print settings can be changed. Use pause for
short breaks in printing, or when changing set-
tings in the middle of a print.
To pause print:
1. Press "Option" icon on print status screen.
Print settings menu will open (see
Figure 33).
2. Press "Pause" icon (see Figure 33). Printing
will stop and "Pause" icon will change to
"Resume."
3. Press "Resume" icon to continue printing.
Figure 33. Print settings.
Figure 34. Print settings.
Stopping Print
Resuming Print from Breakpoint
1. Insert SD card into SD slot.
2. Press "Settings" icon on main menu. Settings
menu will open.
3. Press "Continue" icon. Choose file screen will
open.
4. Press "Page up" and "Page down" icons to
navigate menu, then press icon of GRIZZLY.G
file. Confirmation screen will open.
5. Press "Confirm" icon. Print status screen will
open, axes will home, then printing will begin.