Grizzly G0869, Owner'S Manual, Page: 49 / 72

Model G0869/G0870 (Mfd. Since 01/19)
-47-
Trunnion Slides
Lubrication Type ... T26419 or NLGI#2 Equivalent
Amount ..................................................1-2 Dabs
Lubrication Frequency .....................6–12 Months
Clean out the front and rear trunnion slides with
mineral spirits and a rag, then apply grease into
each groove. Move the blade tilt back and forth to
spread the grease (see
Figures 73–75).
Figure 73. Location of trunnion slides.
Front
Trunnion
Slide
Rear
Trunnion
Slide
Figure 75. Close-up of front trunnion slide.
Front Trunnion Slide
Figure 74. Close-up of rear trunnion slide.
Rear Trunnion Slide
Clean away any built-up grime and debris from
the rack & pinion assemblies (see
Figures 76–78)
with a wire brush, rags, and mineral spirits. Allow
the components to dry, then apply a thin coat of
grease to them. Move components through range
of motion to spread grease.
Blade Height and Fence
Rack & Pinion Assemblies
Lubrication Type ... T26419 or NLGI#2 Equivalent
Amount ..........................................................Dab
Lubrication Frequency .....................6–12 Months
Pinion Gear
Rack
Figure 78. Rear fence rack & pinion.
Figure 76. Location of blade height rack & pinion
assembly.
Figure 77. Front fence rack & pinion.
Pinion Gear
Rack
Pinion Gear
Rack