manualshive.com logo in svg

Grizzly G0852, Owner'S Manual

The Grizzly G0852 Owner's Manual is an essential companion for users of this remarkable product. Easily accessible for download, our free manual provides step-by-step instructions and maintenance tips, ensuring hassle-free operation and optimal performance. Visit manualshive.com to download your copy today and unleash the full potential of your Grizzly G0852.

Share
Download
background image

-4-

Model G0852 (Mfd. Since 12/18)

The information contained herein is deemed accurate as of 8/15/2019 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2

Model G0852

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0852 1.5 HP QUIET CYCLONE DUST COLLECTOR

Product Dimensions:

Weight.............................................................................................................................................................. 247 lbs.

Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 36-1/2 x 55 x 78 in.

Footprint (Length x Width)..................................................................................................................... 28-1/2 x 47 in.

Shipping Dimensions:

Type.......................................................................................................................... Wooden Pallet w/Cardboard Box

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 280 lbs.

Length x Width x Height....................................................................................................................... 49 x 30 x 40 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement............................................................................................. 120V or 240V, Single-Phase, 60 Hz

Prewired Voltage.................................................................................................................................................. 120V

Full-Load Current Rating.................................................................................................... 15A at 120V, 7.5A at 240V

Minimum Circuit Size.......................................................................................................... 20A at 120V, 15A at 240V

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length................................................................................................................................................. 6 ft.

Power Cord Gauge......................................................................................................................................... 12 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type................................................................................................................................................ 5-15

Recommended Plug Type...................................................................................................................... 6-15 for 240V

Switch Type...................................................................................... ON/OFF Push-Button Switch w/Shut-Off Paddle

Motors:

Main

Horsepower............................................................................................................................................. 1.5 HP

Phase............................................................................................................................................ Single-Phase

Amps.................................................................................................................................................... 15A/7.5A

Speed................................................................................................................................................ 3450 RPM

Type.......................................................................................................................... TEFC Capacitor Start/Run

Power Transfer ............................................................................................................................... Direct Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Centrifugal Switch/Contacts Type.......................................................................................................... Internal

Machine Data Sheet

Summary of Contents for G0852





















































Reviews:

No comments

Related manuals for G0852

Zero RPC-2 Manual preview
RPC-2
Brand: Zero Pages: 12
Donaldson DFOE3 Installation And Operation Manual preview
DFOE3
Brand: Donaldson Pages: 18
Powermatic 1791078K Instructions And Parts Manual preview
1791078K
Brand: Powermatic Pages: 24
Rikon Power Tools 60-101 Operator'S Manual preview
60-101
Brand: Rikon Power Tools Pages: 16
belfab LHP Instruction And Maintenance Manual preview
LHP
Brand: belfab Pages: 23
Trelawny A70 Operation And Maintenance Manual preview
A70
Brand: Trelawny Pages: 20
Festool CTL MINI Operating Instructions Manual preview
CTL MINI
Brand: Festool Pages: 7
Festool CT 33 E Instruction Manual preview
CT 33 E
Brand: Festool Pages: 26
Grizzly G0944 Owner'S Manual preview
G0944
Brand: Grizzly Pages: 36

Brands by name

Popular brands

Load more brands