Model G0771Z (Mfd. Since 01/21)
-21-
7
. Press end cap into left end of front fence rail
(see Figure 19).
6.
Insert (2) M8-1.25 x 16 hex bolts into bottom
slot on left end of fence rail (see Figure 18).
These will be used later for mounting the
switch.
Figure 18.
Hex bolts for mounting switch.
x 2
Figure 19.
Left end cap on front fence rail.
11
. Install rear fence rail on rear of table using
(8) M8-1.25 x 25 cap screws, as shown in
Figure
23. Secure outer four cap screws with
M8-1.25 hex nuts.
Figure 22.
Switch installed.
x 2
10.
Install switch onto hex bolts from Step 6
using (2) M8-1.25 hex nuts and 8mm lock
washers (see Figure 22).
8
. Orient fence rail so scale faces you. Slide (8)
M8-1.25 x 30 hex bolts into open slot (see
Figure
20).
9
. Align hex bolts in fence rail with holes in
table, then insert bolts into table. Be sure
scale on fence rail faces up. Hand tighten (8)
M8-1.25 hex nuts onto hex bolts. Do not fully
tighten yet (see Figure 21).
Figure 20.
Hex bolt positioned in front fence rail
slot.
Slot
x 8
Scale
Figure 21.
Mounting front fence rail.
x 8
Figure 23.
Rear fence rail mounted.
Rear Fence
Rail
x 2
x 2
x 4
