-2-
Model G0760 (Mfd. Since 12/13)
Power Feed Controls
Use
Figures 18–19 and the following descriptions
to become familiar with the power feed controls.
Note: The power feed must be connected to an
independent, grounded 110V power supply to
operate.
G. Limit Stops. Restrict table movement in their
locked position along front of table.
H. Limit Switch. Stops table movement when
either side plunger contacts a limit stop.
Figure 18. X-axis power feed controls.
A
B
C
D
E
F
Figure 19. Limit switch and limit stops.
G
H
A. ON/OFF Light. Illuminates when unit is
turned
ON.
B. Direction Lever. Controls direction of pow-
ered table travel.
C. Rapid Switch. When held down, moves
table rapidly in the direction chosen.
D. Power Light. Illuminates when unit is con-
nected to power.
E. Speed Dial. Controls rate of power feed.
F. ON/OFF Switch. Turns power feed ON and
OFF.
Summary of Contents for G0760
Page 62: ......
