Grizzly G0695, Owner'S Manual

Page: 6 / 56

-4-
Model G0695 (Mfd. Since 01/17)
Controls &
Components
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Control Panel
A
B
C
F
E
D
G. X-Axis Handwheels: Controls left-right
(X-axis) travel of the table.
H. X-Axis Limit Stops: Limits X-axis table
travel.
I. X-Axis Table Locks: Locks the table, pre-
venting table travel in the X-axis.
J. Limit Block: Stops X-axis table movement
when the limit stops contact the block.
K. Y-Axis Handwheel: Controls in-out (Y-axis)
travel of the table.
L. Y-Axis Lock: Locks the saddle, preventing
the table from moving in the Y-axis.
M. Y-Axis Limit Stops: Limit Y-axis table travel.
Table Controls
Figure 2. Main table travel controls.
Table Locks
G
K
N
H
I
G
M
H
Refer to
Figure 1 and the following descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and stay safe when operat-
ing this machine.
A. Power Lamp: Lights when there is power to
the machine.
B. Direction Switch: Controls the direction of
spindle rotation.
C. Digital Speed Readout: Displays the spindle
speed in revolutions per minute (RPM).
D. Speed Dial: Controls the spindle speed.
E. Stop Button: Turns the spindle OFF. You
must twist this button clockwise so that it
pops out before restarting the spindle with the
ON button.
Figure 1. Control panel.
Note:
Pressing this button DOES NOT
DISCONNECT MILL FROM POWER.
F. ON Button: Turns the spindle ON when
there is power to the machine and the stop
button is not pushed in.