g0664 heavy duty Metal-Cutting Bandsaw
-19-
Roller Table
Assembly
the Model g0664 comes with two auxiliary roller
tables to support long workpieces during opera-
tion.
To assemble the roller tables:
1. insert one lower leg into the upper leg assem-
bly, as shown in
figure 12. tighten one of
the cap screws to temporarily hold the leg in
place. repeat for the other seven legs.
figure 12. lower leg attachment.
2. thread one foot assembly into one of the
lower legs, as shown in
figure 13. repeat for
the other seven feet.
figure 13.
Foot attachment.
3. attach a leg assembly to the under-side
of each end of both roller tables with four
M8-1.25 x 16 hex bolts, four 8mm flat wash-
ers, and four M8-1.25 hex nuts (
figures 14
–
15).
lower leg
upper leg assembly
lower leg
Foot assembly
figure 14.
Placing legs on roller table.
leg assembly
roller table
figure 15.
Attaching legs to roller table.
x4
leg assembly
roller table
