Model G0654 (Mfg. Since 9/07)
-41-
the fence stops simplify the task of adjusting the
fence to 45˚ inward, 90˚, and 45˚ outward (135˚).
Tools Needed
Qty
45° square ........................................................ 1
90° square ........................................................ 1
sliding Bevel ...................................................... 1
Wrench 14mm ................................................... 1
Wrench 10mm ................................................... 1
To set the 45˚ inward fence stop:
1. using a 45˚ square, adjust the fence to the
45˚ inward position, as shown in
figure 71.
3. adjust the 45˚ inward fence stop bolt until
it makes contact with the back of the fence
bracket.
4. retighten the jam nut loosened in Step 2.
figure 72. 45˚ inward fence stop bolt.
Setting fence Stops
To set the 90˚ fence stop:
1. using a 90˚ square, adjust the fence to the
90˚ position, as shown in
figure 73.
3. loosen the jam nut on the 90˚ fence stop bolt
(see
figure 74).
4. adjust the 90˚ fence stop bolt until it makes
contact with the 90˚ plunger knob shaft.
5. retighten the jam nut loosened in Step 3.
figure 71. example of adjusting fence 45˚
inward.
2. loosen the jam nut shown in figure 72.
2. push the plunger in.
figure 74. plunger engaged.
plunger
figure 73. example of adjusting fence to 90˚.
Jam nut
Fence stop
Bolt
Fence
Bracket
Fence stop
Bolt
Jam nut
Summary of Contents for G0654
Page 56: ......
