Grizzly G0630, Owner'S Manual

Page: 18 / 28

-16-
G0630 Extra Long Downdraft Table
Cleaning the Model G0630 is easy and will pro-
long the life of your downdraft table.
• Wipe the table top with a clean rag. If your
table surface gets gummy from wood pitch,
you can use a non-corrosive blade cleaner
like Oxisolv
®
(Model G1955) to easily remove
it without harming the tabletop surface. DO
NOT clean with products that will harm the
paint on the table surface like brake parts
cleaner, acetone, or gasoline.
Cleaning
SECTION 6: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious personal
injury.
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
• Check table top for damage or clogged
slots.
• Empty filters and check for damage.
• Loose mounting bolts.
• Worn or damaged wires.
• Other unsafe condition.
Weekly Check:
• Clean/vacuum dust buildup from inside cabi-
net and off motor.
Schedule
Filters
The filters may need service if suction is notice-
ably reduced. The amount of use determines how
often you must service the filter.
• Remove the filter bag, vacuum excess dust
from the cabinet interior, and reinstall the fil-
ter bag.
To service the filters:
1. DISCONNECT DOWNDRAFT TABLE FROM
THE POWER SOURCE!
2.
Open the cabinet door and remove the filter
bag.
3. Gently empty the contents of the filter bag
into a disposable bag. Seal and discard the
bag properly.
4. Reinstall the filter bag, secure the filter bag
knob, and close the cabinet door.
Always wear a dust mask
and safety glasses when
servicing and changing
filters. Sawdust may
cause allergic reactions
or respiratory problems.