-12-
Model G0477
15" Planer/Moulder
inventory
inventory (figure 3)
Qty
A. Long Frames .............................................. 2
b. short Frames .............................................. 2
c. plain Legs ................................................... 2
D. notched Legs ............................................. 2
E. Long Braces ............................................... 2
f. short Braces .............................................. 2
G. planer/moulder (not shown) ........................ 1
components and hardware (not shown)
•
roller Adjustment Wrench .......................... 1
•
open-End Wrench 8/10mm ........................ 1
•
rubber grip Magnets ................................. 2
•
hex Wrench 4mm ....................................... 1
•
dust Chute ................................................. 1
•
dust Chute Adapter .................................... 1
•
dust Collection Bag .................................... 1
•
Bag Clamp .................................................. 1
•
Cap screw M6-1 x 25 ................................. 1
•
Button head Cap screw M6-1 x 25 ........... 1
•
Crank handle ............................................. 1
•
handle plug ................................................ 1
•
phillips head screw M6-1 x 25 .................. 1
•
Cap screws #10-32 x 2
3
⁄
8
" ......................... 2
•
Flat Washers #10........................................ 2
•
Wing screws
1
⁄
4
-20 x 1
1
⁄
4
" ........................... 4
•
Flat Washers
1
⁄
4
" ......................................... 4
•
threaded guide inserts ........................... 12
•
hex Bolts M8-1.25 x 80 (stand) ................. 4
•
Flat Washers 8mm (stand) ........................ 8
•
hex nuts M8-1.25 (stand) .......................... 4
•
Carriage Bolts
5
⁄
16
-18 x
3
⁄
4
" (stand) ........... 24
•
Flange nuts
5
⁄
16
-18 (stand) ....................... 24
the Model G0477 is a
very heavy machine.
Serious personal injury
may occur if safe mov-
ing methods are not fol-
lowed. to be safe, you
will need assistance
when moving the ship-
ping box and removing
the machine from the
box.
figure 3. g0477 inventory.
A
B
C
d
E
F
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
