Grizzly G0456, Owner'S Manual

Page: 30 / 56

-20-
G0456 Variable Speed Wood Lathe
Selecting Turning
Tools
Lathe tools come in a variety of shapes and sizes
and usually fall into five major categories.
• Gouges: Mainly used for rough cutting, detail
cutting, and cove profiles. The rough gouge
is a hollow, double-ground tool with a round
nose, and the detail gouge is a hollow, dou-
ble-ground tool with either a round or pointed
nose.
Figure 19
shows an example of a
gouge.
Figure 19. Gouge.
•
Skew Chisel:
A very versatile tool that can be
used for planing, squaring, V-cutting, bead-
ing, and parting off. The skew chisel is flat,
double-ground with one side higher than the
other (usually at an angle of 20-40˚).
Figure
20
shows an example of a skew chisel.
Figure 20. Skew chisel.
•
Scrapers:
Mainly used where access for
other tools is limited, such as hollowing oper-
ations. This is a flat, double-ground tool that
comes in a variety of profiles (Round Nose,
Spear Point, Square Nose, etc.) to match
many different contours.
Figure 21 shows an
example of a round nose scraper.
Figure 21.
Round nose scraper.
Figure 22. Parting tool.
•
Parting Tools:
Used for sizing and cutting off
work. This is a flat tool with a sharp pointed
nose that may be single- or double-ground.
Figure 22 shows an example of a parting
tool.
• Specialty Tools: These are the unique, spe-
cial function tools to aid in hollowing, bowl
making, cutting profiles, etc. The Swan Neck
Hollowing Tool shown on
Page 27
is a good
example of a specialty tool.