Grizzly G0453W, Owner'S Manual

Page: 63 / 76

G0453W/ZW–G0454W/ZW (Mfd. Since 05/16)
-61-
G0453ZW Machine Labels A
(11/27/15)
• 1:1 Sizing (Labels are actual size) • Labels must be made of oil-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at
manuals@grizzly.com
Motor: 3 HP, 240V, Single-Phase, 60 Hz, 12A
Cutterhead: Spiral w/Indexable Inserts
Replacement Inserts: H7319 (10 Pack)
Number of Inserts: 72
Cutterhead Speed: 5000 RPM
Cutterhead Diameter: 3"
Feed Rates: 16 & 20 FPM
Maximum Cutting Width: 15"
Maximum Cutting Height: 8"
Minimum Stock Length: 6"
Minimum Stock Thickness: 3/16"
Maximum Depth of Cut Per Pass: 1/8"
Weight: 525 lbs.
Specifications
WARNING!
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses and respirator.
3. Disconnect power before changing inserts, removing machine
components, or doing maintenance, service, or adjustments.
4. Only plug power cord into a grounded outlet.
5. Do not wear loose clothing, gloves, jewelry, or other items that
can get entangled. Tie back long hair and roll up sleeves.
6. Ensure machine is correctly setup before starting.
7. Never cut deeper than 1/8" on a single pass.
8. Never plane material smaller than 8" long, 3/4" wide, or 3/16" thick.
9. Do not allow hands or clothing to get pulled into cutting area
while feeding workpiece.
10. Stand clear of board ends during cutting operation.
11. Do not plane boards with cracks, loose knots, or other defects.
12. Inserts are sharp! Use extreme caution when changing/adjusting.
13. Never reach into cutting area during machine operation.
MODEL G0453ZW
15" SPIRAL CUTTERHEAD
PLANER
PANTONE 151 C or RAL 2005
WARNING GRIZZLY LOGO RED
C=0, M=100, Y=100, K= 0
GREEN
PANTONE 568
COLOR CODES FOR GRIZZLY SAFETY LABELS
32 x 292mm
120 x 166mm
Labels marked *** have changed since last sending
G0453ZW Machine Labels A
(11/27/15)
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at
Motor: 3 HP, 240V, Single-Phase, 60 Hz, 12A
Cutterhead: Spiral w/Indexable Inserts
Replacement Inserts: H7319 (10 Pack)
Number of Inserts: 72
Cutterhead Speed: 5000 RPM
Cutterhead Diameter: 3"
Specifications
WARNING!
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses and respirator.
3. Disconnect power before changing inserts, removing machine
components, or doing maintenance, service, or adjustments.
4. Only plug power cord into a grounded outlet.
MODEL G0453ZW
15" SPIRAL CUTTERHEAD
PLANER
PANTONE 151 C or RAL 2005
WARNING GRIZZLY LOGO RED
C=0, M=100, Y=100, K= 0
GREEN
PANTONE 568
COLOR CODES FOR GRIZZLY SAFETY LABELS
32 x 292mm
Labels marked *** have changed since last sending
PANTONE 568 C
Grizzly.com Label Colors
Planer Generic Labels A
320 x 36mm
Grizzly Planer
Generic Labels
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 151 C or RAL 2005 WARNING
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
ANSI COLOR CODES FOR SAFETY LABELS
50 x 84mm
67 x 32mm
50 x 84mm
102 x 102mm
50 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
36 x 32mm
64 x 60mm
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
121 x 13mm
Dow
n Up
67 x 21mm
100 x 52mm
(12.24.15)
Labels marked *** have changed since last sending.
Only shift gearbox when
planer is running.
Neutral 20 FPM 16 FPM
***
Add SAE 30 oil every 24 hours of operation.
NOTICE
Requires 80W-90W
or Equivalent
Gear Oil.
GEARBOX MUST
BE FILLED WITH OIL!
REFER TO
OWNER’S MANUAL
Grizzly Planer
Generic Labels
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 151 C or RAL 2005 WARNING
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
ANSI COLOR CODES FOR SAFETY LABELS
50 x 84mm
67 x 32mm
50 x 84mm
102 x 102mm
50 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
36 x 32mm
64 x 60mm
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
121 x 13mm
Dow
n Up
67 x 21mm
100 x 52mm
(12.24.15)
Labels marked *** have changed since last sending.
Only shift gearbox when
planer is running.
Neutral 20 FPM 16 FPM
***
Add SAE 30 oil every 24 hours of operation.
NOTICE
Requires 80W-90W
or Equivalent
Gear Oil.
GEARBOX MUST
BE FILLED WITH OIL!
REFER TO
OWNER’S MANUAL
Grizzly Planer
Generic Labels
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 151 C or RAL 2005 WARNING
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
ANSI COLOR CODES FOR SAFETY LABELS
50 x 84mm
67 x 32mm
50 x 84mm
102 x 102mm
50 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
36 x 32mm
64 x 60mm
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
121 x 13mm
Dow
n Up
67 x 21mm
100 x 52mm
(12.24.15)
Labels marked *** have changed since last sending.
Only shift gearbox when
planer is running.
Neutral 20 FPM 16 FPM
***
Add SAE 30 oil every 24 hours of operation.
NOTICE
Requires 80W-90W
or Equivalent
Gear Oil.
GEARBOX MUST
BE FILLED WITH OIL!
REFER TO
OWNER’S MANUAL
G0453W, G0453ZW,
G0454W, G0454ZW
Machine Labels B
(6/12/15)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
193 x 108mm
STOP START
Grizzly Planer
Generic Labels
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 151 C or RAL 2005 WARNING
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
ANSI COLOR CODES FOR SAFETY LABELS
50 x 84mm
67 x 32mm
50 x 84mm
102 x 102mm
50 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
36 x 32mm
64 x 60mm
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
121 x 13mm
Dow
n Up
67 x 21mm
100 x 52mm
(12.24.15)
Labels marked *** have changed since last sending.
Only shift gearbox when
planer is running.
Neutral 20 FPM
***
Add SAE 30 oil every 24 hours of operation.
NOTICE
Requires 80W-90W
or Equivalent
Gear Oil.
GEARBOX MUST
BE FILLED WITH OIL!
REFER TO
OWNER’S MANUAL
Grizzly Planer
Generic Labels
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 151 C or RAL 2005 WARNING
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
ANSI COLOR CODES FOR SAFETY LABELS
50 x 84mm
67 x 32mm
50 x 84mm
102 x 102mm
50 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
36 x 32mm
64 x 60mm
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
121 x 13mm
Dow
n Up
67 x 21mm
100 x 52mm
(12.24.15)
Labels marked *** have changed since last sending.
Only shift gearbox when
planer is running.
Neutral 20 FPM 16 FPM
***
Add SAE 30 oil every 24 hours of operation.
NOTICE
Requires 80W-90W
or Equivalent
Gear Oil.
GEARBOX MUST
BE FILLED WITH OIL!
REFER TO
OWNER’S MANUAL
Grizzly Planer
Generic Labels
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 151 C or RAL 2005 WARNING
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
ANSI COLOR CODES FOR SAFETY LABELS
50 x 84mm
67 x 32mm
50 x 84mm
102 x 102mm
50 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
36 x 32mm
64 x 60mm
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
121 x 13mm
Dow
n Up
67 x 21mm
100 x 52mm
(12.24.15)
Labels marked *** have changed since last sending.
Only shift gearbox when
planer is running.
Neutral 20 FPM 16 FPM
***
Add SAE 30 oil every 24 hours of operation.
NOTICE
Requires 80W-90W
or Equivalent
Gear Oil.
GEARBOX MUST
BE FILLED WITH OIL!
REFER TO
OWNER’S MANUAL
Grizzly Planer
Generic Labels
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 151 C or RAL 2005 WARNING
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
ANSI COLOR CODES FOR SAFETY LABELS
50 x 84mm
67 x 32mm
50 x 84mm
102 x 102mm
50 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
36 x 32mm
64 x 60mm
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
121 x 13mm
Dow
n Up
67 x 21mm
100 x 52mm
(12.24.15)
Labels marked *** have changed since last sending.
Only shift gearbox when
planer is running.
Neutral 20 FPM 16 FPM
***
Add SAE 30 oil every 24 hours of operation.
NOTICE
Requires 80W-90W
or Equivalent
Gear Oil.
GEARBOX MUST
BE FILLED WITH OIL!
REFER TO
OWNER’S MANUAL
Grizzly Planer
Generic Labels
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 151 C or RAL 2005 WARNING
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
ANSI COLOR CODES FOR SAFETY LABELS
50 x 84mm
67 x 32mm
50 x 84mm
102 x 102mm
50 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
36 x 32mm
64 x 60mm
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
121 x 13mm
Dow
n Up
67 x 21mm
100 x 52mm
(12.24.15)
Labels marked *** have changed since last sending.
Only shift gearbox when
planer is running.
Neutral
20 FPM
16 FPM
***
Add SAE 30 oil every 24 hours of operation.
NOTICE
Requires 80W-90W
or Equivalent
Gear Oil.
GEARBOX MUST
BE FILLED WITH OIL!
REFER TO
OWNER’S MANUAL
Grizzly Planer
Generic Labels
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 151 C or RAL 2005 WARNING
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
ANSI COLOR CODES FOR SAFETY LABELS
50 x 84mm
67 x 32mm
50 x 84mm
102 x 102mm
50 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
36 x 32mm
64 x 60mm
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
121 x 13mm
Dow
n Up
67 x 21mm
100 x 52mm
(12.24.15)
Labels marked *** have changed since last sending.
Only shift gearbox when
planer is running.
Neutral 20 FPM 16 FPM
***
Add SAE 30 oil every 24 hours of operation.
NOTICE
Requires 80W-90W
or Equivalent
Gear Oil.
GEARBOX MUST
BE FILLED WITH OIL!
REFER TO
OWNER’S MANUAL
Grizzly Planer
Generic Labels
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 151 C or RAL 2005 WARNING
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
ANSI COLOR CODES FOR SAFETY LABELS
50 x 84mm
67 x 32mm
50 x 84mm
102 x 102mm
50 x 84mm
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
36 x 32mm
64 x 60mm
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
121 x 13mm
Dow
n Up
67 x 21mm
100 x 52mm
(12.24.15)
Labels marked *** have changed since last sending.
Only shift gearbox when
planer is running.
Neutral 20 FPM 16 FPM
***
Add SAE 30 oil every 24 hours of operation.
NOTICE
Requires 80W-90W
or Equivalent
Gear Oil.
GEARBOX MUST
BE FILLED WITH OIL!
REFER TO
OWNER’S MANUAL
601
602
603
604
605
606
607
608
609
609
610
G0453W
611
612
613
614
615
616
617
Motor: 3 HP, 240V, Single-Phase, 60 Hz, 12A
Cutterhead: Spiral w/Indexable Inserts
Replacement Inserts: H7319 (10 Pack)
Number of Inserts: 72
Cutterhead Speed: 5000 RPM
Cutterhead Diameter: 3"
Feed Rates: 16 & 20 FPM
Maximum Depth of Cut Per Pass: 1/8"
Minimum Stock Thickness: 3/16"
Minimum Stock Length: 6"
Maximum Cutting Width: 15"
Maximum Cutting Height: 8"
Weight: 525 lbs.
Specifications WARNING!
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses and respirator.
3. Disconnect power before changing inserts, removing machine
components, or doing maintenance, service, or adjustments.
4. Only plug power cord into a grounded outlet.
5. Do not wear loose clothing, gloves, jewelry, or other items that
can get entangled. Tie back long hair and roll up sleeves.
6. Ensure machine is correctly setup before starting.
7. Never cut deeper than 1/8" on a single pass.
8. Never plane material smaller than 8" long, 3/4" wide, or 3/16" thick.
9. Do not allow hands or clothing to get pulled into cutting area
while feeding workpiece.
10. Stand clear of board ends during cutting operation.
11. Do not plane boards with cracks, loose knots, or other defects.
12. Inserts are sharp! Use extreme caution when changing/adjusting.
13. Never reach into cutting area during machine operation.
14. Do not operate when tired or under influence of drugs or alcohol.
15. Do not expose to rain or use in wet locations.
16. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Grizzly in China
Date
S/N
MODEL G0453ZW
15" SPIRAL CUTTERHEAD
PLANER
Labels (G0453W & G0453ZW)
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
REF PART # DESCRIPTION REFPART # DESCRIPTION
601V2 P0453W601V2 MACHINE ID LABEL (G0453W) V2.08.16 609 P0453W609 MODEL NUMBER LABEL (G0453W)
601V2 P0453W601V2 MACHINE ID LABEL (G0453W) V2.08.16 610 P0453W610 INVENTORY COMPONENTS SHIPPING NOTICE TAG
602 P0453W602 DISCONNECT POWER LABEL 611 P0453W611 EYE/EAR/LUNG INJURY HAZARD LABEL
603 P0453W603 BELT COVER LABEL 612 P0453W612 ELECTRICITY LABEL
604 P0453W604 GRIZZLY.COM LABEL 613 P0453ZW613 CONTROL PANEL LABEL (G0453ZW)
605 P0453W605 HANDWHEEL ROTATION LABEL 614 P0453W614 CHECK OIL NOTICE LABEL
606 P0453W606 FEED SELECTOR LABEL 615 P0453W615 READ MANUAL LABEL
607 P0453W607 STOP CHECK OIL TAG 616 P0453W616 GRIZZLY GREEN TOUCH-UP PAINT
608 P0453W608 GRIZZLY NAMEPLATE 617 P0453W617 GRIZZLY BEIGE TOUCH-UP PAINT
609 P0453W609 MODEL NUMBER LABEL (G0453W)