Grizzly ERT 230, Translation Of The Original Instructions For Use

Page: 23 / 140

23
GB
Technical data
Electric lawn trimmer .................ERT 230
Rated input voltage .............230 V~, 50 Hz
Power input ..................................... 250 W
Idling speed ............................. 13000 min
-1
Protection Class ................................... II
Protection category ............................ IP20
Weight without cable ........................ 1.3 kg
Nylon thread (tap mechanism)
Thread length .................................5,0 m
Cutting circle ..............................230 mm
Line thickness .............................1.2 mm
Sound pressure level
(L
PA
) ..........................82 dB(A); K
PA
=3,0 dB
Sound power level (L
WA
)
measured .. 92.1 dB(A); K
WA
=2.27 dB(A)
guaranteed ................................96 dB(A)
Vibration at the Handle
(a
h
) ........................ 2.5 m/s
2
; K= 1.5 m/s
2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool
is turned off and times when the
tool is turned on but is running idle)
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
Replacement parts/
Accessories
Spare parts and accessories
can be obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre (see “Grizzly
Service-Center”). Please have the order
number mentioned below ready.
String spool ....................Art. Nr. 13601001
Alternatively, you can obtain a 1.2 mm
thick nylon thread from specialist retailers
and wind this onto the thread reel yourself.
In this case, it must be ensured that no
more than 5.0 m thread is wound on – in
the opposite direction to the engine rota-
tion direction. The engine rotation direction
is indicated with an arrow on the protective
cover.