Grizzly ERM 1846 GTA, Translation Of The Original Instructions For Use

Page: 31 / 128

GB
31
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment does
not start
Power is off
Check the socket, cable, wire and
plug and have any repairs carried out
by an electrician
Defective start lever ( 2)
or release button ( 20)
Repair by customer services
Worn carbon brushes
Defective motor
Grass too long
Set a greater cut height. Lift the front
wheels slightly by pressing down on
the handle bar.
Motor stops Blockage by foreign object Remove the foreign object
Result unsatis-
factory or motor
labours
Cut height too low Set a higher cut height
Blade ( 27) blunt
Have the blade sharpened or replace
it
Blade area blocked Clean the equipment
Blade ( 27) assembled
incorrectly
Install the blade correctly
Blade fails to turn
Blade ( 27) blocked by
grass
Remove the grass
Blade screw ( 28) loose Tighten the blade screw
Strange noises, rat-
tling or vibrations
Blade screw ( 28) loose Tighten the blade screw
Blade ( 27) damaged
Replace the blade
Replacement parts/Accessories
Spare parts and accessories can be obtained at www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre (see “Grizzly Ser-
cice-Center”). Please have the order number mentioned below ready.
Pos. Pos. Description Product No.
Instruction Exploded
Manual Drawing
7 S13 Grass catcher 91102601
23 S3 Mulching kit 91099492
25 109 Side ejection channel 91102603
27/28
S12 Blade + blade screw 13700212
47 V-belt, motor 91102560
S18 V-belt, wheel drive 91102609