Grizzly ERM 1637-3 Stow, Original Instructions For Use

Page: 29 / 128

GB
29
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment does
not start
Power is off
Check the socket, cable, wire and
plug and have any repairs carried
out by an electrician
Defective start lever ( 2) or
release button ( 17)
Repair by customer services
Worn carbon brushes
Defective motor
Grass too long
Set a greater cut height. Lift the
front wheels slightly by pressing
down on the handle bar.
Motor stops Blockage by foreign object Remove the foreign object
Result unsatis-
factory or motor
labours
Cut height too low Set a higher cut height
Blade ( 20) blunt
Have the blade sharpened or
replace it
Blade area blocked Clean the equipment
Blade ( 20) assembled in-
correctly
Install the blade correctly
Blade fails to
turn
Blade ( 20) blocked by
grass
Remove the grass
Blade screw ( 21) loose
Tighten the blade screw
Strange noises,
rattling or vibra-
tions
Blade screw ( 21) loose Tighten the blade screw
Blade ( 20) damaged Replace the blade
Replacement parts/Accessories
Spare parts and accessories can be obtained at
www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre (see “Grizzly Ser-
cice-Center”). Please have the order number mentioned below ready.