Grizzly ERM 1637-3 Stow, Original Instructions For Use

Page: 27 / 128

GB
27
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
• Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
.
Waste disposal and envi-
ronmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center. Be environ-
mentally friendly. Return the tool, acces-
sories and packaging to a recycling centre
when you have finished with them.
Machines do not belong with do-
mestic waste.
• The plastic and metal parts employed
can be separated out and thus recy-
cled use can be implemented. Ask our
Service-Center for details.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.
• Defective units returned to us will be
disposed of for free.
Technical Specifications
Electric Lawnmower ..ERM 1637-3 Stow
Motor input power ......................... 1600 W
Mains voltage .............. 220-240 V~, 50 Hz
Protection class ...................................II
Protection type ...................................IPX4
Idling speed ...............................3450 min
-1
Cutting circle ....................................37 cm
Cut height .................................. 25-75 mm
Weight .........................................ca. 15 kg
Lawn bag volume .................................35 l
Sound pressure specification
(L
pA
) .........................88 dB(A), K
pA
= 3 dB
Noise level specification (L
WA
)
guaranteed ............................... 96 dB(A)
measured .......93,1 dB(A), K
WA
= 2.05 dB
Vibration (a
h
) ............................... ≤ 2.5 m/s
2
This device is designed for operation on a
power supply network with a system impe-
dance Z
max
at the transfer point (domestic
connection) of a maximum of 0.313 Ohms.
The user must ensure that the device is
operated only on a power supply network
that fulfils this requirement.
If necessary, the local power supply com-
pany can be asked for the system impe-
dance.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protec-