Grizzly Tools ERM 1500-33 LF, Translation Of The Original Instructions For Use

Page: 59 / 140

GB
59
or people who are unfamiliar with these
instructions. The use of the equipment is
prohibited in the rain or a damp environ -
ment.
The manufacturer will not be liable for
damages caused by use other than for the
intended purpose or by incorrect opera -
tion.
General Description
Function Description
The hover mulching mower .has a cutting
tool, which turns parallel to the cutting lev -
el. It is equipped with a high performance
electric motor, robust plastic housing,
safety switch, collision guard, and grass
box.The machine is 4-step height adjust -
able and has smooth-running rollers.
For the function of the operating parts,
please refer to the descriptions below.
The illustration how to handle the
appliance can be found on the
pages 2-4.
Summary
1 Curved handle
2 Tightening lever
3 Lower bar
4 Spanner for blade bolt
5 Collision guard
6 Grass box
7 Cutting height adjustment (not
visible)
8 Air cushion deck
9 Rollers
10 Lawnmower housing
11 Connection cable
12 2 Cable holder
13 Appliance socket
14 Release button
15 Cable strain relief
16 Start lever
17 Blade bolt
18 Blade
19 Spacers
20 Fan
Technical Specifications
Air Cushion
Mulching Mower ..........ERM 1500-33 LF
Motor input power .........................1500 W
Mains voltage ............. 220-240 V~, 50 Hz
Idling speed .............................. 4200 min
-1
Blade width ................................. 330 mm
Cut height ..................... 4-tiered, 10-33 mm
Protection class ................................. II
Protection type ................................... IPX4
Weight ............................................. 7,5 kg
Thermal insulation class ..........................155
Lawn box volume .................................20 l
Sound pressure specification
(L
pA
) ........................ 72 dB(A); K
pA
=3 dB
Noise level specification (L
WA
)
measured ........ 91,6 dB(A); K
WA
=2,07 dB
guaranteed .............................. 94 dB(A)
Vibration
on the handle (a
h
) .. 1,8 m/s
2
; K=1,5 m/s
2
The noise and vibration values have
been determined in accordance with the
standards and regulations specified in the
declaration of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.