background image

To ensure maximum functionality and light output it is recommended to follow these instructions:

5.1 Cleaning the unit

The unit must be cleaned regularly. Cleaning regularity will depend especially on the environment where the unit

will operate: deposits of dust, smokes or other wastes will reduce the light output performances.

• Clean regularly the glass of the unit.

• Be careful when cleaning the components. Operate in a clean, properly illuminated environment. 

• Do not use solvents which could damage plastic or painted surfaces. 

• Remove left particles by a cotton towel dampened with a glass-cleaning liquid or distilled water.

• Remove smoke and other wastes by a cotton towel dampened with isopropyl alcohol. 

• Dry out by a clean, soft, non-scratching towel or by compressed air.

5.2 Regular checks

• Check electrical connections, especially the ground wiring and the power supply cable.

• Check that the unit is not damaged mechanically. Replace those components which have got deteriorated.

All components of the unit are available as spare parts at 

Griven

dealers. 

Exploded views, wiring diagrams, electronic layouts and advertising brochures are available on request.

To make the job of assistance centres easier, specify serial number and model of the unit which spare parts are

requested for. 

The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old li-

ghting fixtures must not be disposed of the normal unsorted municipal waste stream. Old appliances must be

collected separately in order to optimise the recovery and recycling of the materials they contain and reduce

the impact on human health and the environment.

The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when

you dispose of the appliance it the must be separately collected.

Consumer should contact their local authority or retailer for information conceming the correct di-

sposal of their old appliance.

5.0 Maintenance

Attention! 

Always remove mains power prior to opening up the fixture.

6.0 Spare parts

7.0 Disposal

14

English

Summary of Contents for AL4426

















Reviews: