GRIT GRITJunior Assembly Manual & User'S Manual Download

Page: 47 / 54

CAUTION:

WET CONDITIONS DECREASE BRAKING PERFORMANCE. Use

caution when riding in wet conditions. Wet tires require more braking force for stopping.
Riding in wet conditions without the ability to apply the braking force required for stopping
could result in a collision or a fall.

8.3. Curbs

It is possible to ride the GRIT Junior down curbs, as long as the chair is ridden

straight o

the curb and not at an angle

. Here are some tips:

• Ride straight o of the curb, not at an angle.

•

Young riders should always ride with an adult supervising and supporting them from behind.

• Make sure your young rider has enough space in front of the curb to safely ride o of it.

Watch out for tra c, pedestrians, and obstacles!

• If possible, have your young rider engage both levers (to lift the front wheel up) just

before dropping o of the curb. This more evenly distributes weight across the three
wheels.

WARNING:

DO NOT RIDE OFF CURBS AT AN ANGLE. Riding o of a curb at

an angle will cause the GRIT Junior to tip, which may result in a serious fall. Never allow only
one of the rear wheels to fall o of a curb.

Summary of Contents for GRITJunior























































Search results

Summary of Contents for GRITJunior

Reviews:

Related manuals for GRITJunior

Brands by name

Popular brands

GRIT GRITJunior, Assembly Manual & User'S Manual

Search results

Summary of Contents for GRITJunior

Reviews:

Related manuals for GRITJunior

Brands by name

Popular brands