background image

G-SWS

Assembly and Operating Manual

10 EC - Declaration of incorporation

according to the Machinery Directive 2006/42/EC, annex II B

The producer / distributor 

GRIP GmbH Handhabungstechnik
Alter Hellweg 70
D-44379 Dortmund, Germany

hereby declares that the following products

Product designation:

Quick change system (SWS)

Functional description:

Type designation:

G-SWS050 to 250

EN ISO 12100:2010

Authorized representative Dipl.-Ing. (FH) Hasan Canti

Location:

Dortmund

Date:

Dipl.-Ing. (FH) Hasan Canti
Executive Director

8

Systems for the manual and form-closed exchange of components 

such as grippers and tools on robots or receptacles

The provisions of the above-mentioned directives -including their effective amendments- comply 

with the time of the declaration.

He further states that the following essential requirements of the Machinery Directive 2006/42/EC 

were applied and observed: 

annex I, numerics: 1.1.2; 1.1.3; 1.1.5; 1.3.2; 1.7.4 

He further states that the specific technical documentation has been drawn up in accordance with  

annex VII, Part B.

The following harmonized standard has been applied:

Safety of Machinery- Basic concepts, general principles for 

design- Part 1:

Basic terminology and methodology 

13.09.2020

Safety of Machinery- Basic concepts, general principles for 

design- Part 2:

Technical principles 

In the case of reasoned requests, the specific documents shall be sent to the national authorities 

as follows: Post

The product mentioned above may only be put into operation if it has been established applicable 

that the unit, into which the above-mentioned product is to be incorporated, complies with the 

provisions of the Machinery Directive 2006/42/EC. 

Summary of Contents for G-SWS









Reviews: