G-MEK-PM
Assembly and Operating Manual
3 Warranty
4 Scope of Delivery
5 Technical Data
6 Assembly
1.
2.
To connect the electrical feedthroughs, unscrew the electric covers (pos. 3).
3.
4.
6.
7.
Rev. 1.02
3
The complete insulation elements (pos. 11 and 12) can be removed to solder the connections.
Attention! The solder contacts are mounted in a floating manner, their movement margin may
not be restricted after soldering (for example by cables which are too thick or by shrink tubing).
To connect the pneumatic feedthroughs, the customer-side pneumatic screw connections
(M5), must be connected to the threaded bores at the side of the MEK.
Subsequently the o-rings (pos. 8) and the distance bushings (pos. 5) must be pushed in and
covers (pos. 3) must be mounted.
The electrical plug (item 8) belongs to the MEK upper assembly, the electrical socket (pos. 7)
belongs to the MEK lower assembly.
To adjust the upper and lower assemblies, the upper assembly (pos. 1) has to be assembled
completely. Subsequently, the lower assemblies (pos. 2) are mechanically joined and the
insulating body of the lower assembly is aligned by simple plugging onto the contacts of the
upper assembly. In this case, only one position is possible (polarity-proof insulating body).
If several lower assemblies are used, this process is repeated accordingly, the upper assembly
is always the reference piece.
Image 1
Once the connections have been completed, the insulating body must be pushed back into the
housing as far as it will go (pos. 1 or 2).
If the product is used as intended in 1-shift operation the warranty is valid for 24 months from the ex-
works delivery date under observance the mandatory maintenance and lubrication intervals and the
given operating conditions. Generally parts touching the work piece and wear parts are not part of the
warranty. Wear parts are listed in chapter 8.1. The unit is considered to be defective if its basic
function “Feeding through" is no longer functioning.
Behold technical data sheets: TD-MEK063-3PM5-1E12-EN, TD-MEK063-6PM5-1E12-EN, TD-
MEK080-6PM5-1E12-EN
5.
•
MEK as painted in Image 3 depending on the order number of the upper or lower assembly.
