6
7
When in doubt follow the
directions on the Grinders Café
Espresso branded capsule box
regarding required button use.
Figure 1:
Dispensing Position
Figure 3:
Unlock/Dismantle Position
Figure 2:
Cleaning Position
Hot Water button - 80mL
(Lit in
BLUE
) should only
be used for hot water
Do not use the
Hot Water button
to
extract espresso coffee
or any other beverages.
Inappropriate use of this
button may damage the
machine and void your
warranty.
Double Espresso button -
60mL
(Lit in
WHITE
).
Use for dispensing a
double espresso coffee for
a stronger beverage. Also
suitable for Hot Chocolate
and similar beverages.
Latte button - 200mL
(Lit in
WHITE
).
Dispenses 30mL of coffee
followed by 170mL of hot,
frothed milk.
Cappuccino button - 180mL
(Lit in
WHITE
).
Dispenses 30mL of coffee
followed by 150mL of hot,
frothed milk.
Milk Only button - 200mL
(Lit in
WHITE
).
Use for dispensing hot,
frothed milk only. No
capsule required when
using this button.
Single Espresso button -
30mL
(Lit in
WHITE
).
Use for dispensing a single
espresso shot.
MILK JUG LEVER SETTINGS
DIAGRAM 3:
CORRECT USE OF BUTTONS
DIAGRAM 4:
FIRST TIME USE
USE CAFFITALY SYSTEM
COMPATIBLE CAPSULES
We recommend also following these steps after not having used the machine for a long time.
Plug in the appliance
and switch it
ON
by
pressing the
On
/
Off
button
.
Multifunction
Indicator
,
Hot Water
,
Single
and
Double
Espresso buttons
will all flash.
Fill the tank with
still fresh water
(not carbonated).
1.
3.
4.
Press the
Hot Water
button
. Water will cycle
through the system
(will take about 30 sec.).
When done the
RED
Multifunction Indicator
will switch off.
After
Step 5
has
successfully been
completed, all the
button lights will
continue to blink, the
machine is warming
up (this will take
about 1 min.).
Place a large empty
container (at least
250mL) under the
Coffee Dispensing
Spout
.
ON
Make sure the
Lever
is closed
and no capsule
is in the
Capsule
Compartment
.
5.
6.
Continued on next page
If the
Multifunction
Indicator
continues
to blink and no
water has been
extracted repeat
Step 5
.
When all the
button lights
remain steadily lit,
rinse by pressing
the
Hot Water
button
. Press
again to repeat
rinse cycle.
7.
i.
2.
