20
21
After 9 minutes
of disuse the
machine turns off
automatically.
To return to normal
conditions of use,
press the
Power
On/Off button
.
All the button
lights will blink,
the machine is
warming up (this
will take about 1
min.).
When all the
buttons are
steadily lit the
machine is ready.
1.
4.
ENERGY SAVING
2.
3.
9min.
Note:
We recommend to always remove the
Milk Jug
from the machine if it is not in use.
The coffee machine has a higher power demand when it detects the presence of the
Milk Jug
.
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
First Use
There is a burning smell when
the machine first starts and a
beverage button is pressed.
Water residue within the
machine on opening.
• Machine heating up for the
first time.
• The system is quality checked
prior to dispatch. There may be
residual water left from testing.
• There may be a slight
burning smell coming from
the machine when first used.
This is caused by the water
heating as it travels through
the pipes and will dissipate.
Please Note:
Steam may also
be seen coming from the
Capsule Compartment.
This
will also dissipate.
• The water residue will be
removed when you conduct
the
‘First Time Use’
on
Page 7
.
No beverage is brewed.
The Indicator light blinks
RED
.
• The
Water Tank
is empty
and/or
• Incorrect use of the
Hot
Water button
.
• Fill the
Water Tank
with
fresh water. Press
Single
or
Double Espresso button
.
When the buttons remain
steadily lit, the appliance is
ready for use.
• The
Hot Water button
is only
to be used for hot water.
The coffee is not hot enough.
• Cold cups or mugs.
• Scale build-up inside the
machine.
• Preheat cups or mugs by
running under hot water.
• Descale the machine as per
‘Descaling’ on
Page 17
.
The
Lever
cannot be lowered.
• The
Used Capsule Drawer
is full.
• Capsule stuck inside the
Capsule Compartment
.
• Empty out the
Used Capsule
Drawer
.
• Gently push down on the
jammed capsule with a new
capsule.
The
Indicator Light
is on and
steadily lit in
RED
. Water
comes out cold.
• Heating problems.
• Turn off the machine, then
turn it back on after a few
minutes.
If the problem persists please
contact Grinders National
Sales Centre on 1300 476 377
Continued on next page