background image

22

Fig. 37

w

eed

 

brush

The weed brush is fitted to the attachment flange. It is useful for removing 

weeds from driveways, squares, pavements. The brush consists of 

a metal disc equipped with steel braided wire, the working diameter is 

60 cm. With the rotation of the brush disc and the advancement of the 

supporting machine body, weeds are removed from joints. The working 

height and inclination of the brush disc can be adjusted.

Fig. 38

20.  TECHNICAL ASSISTANCE SERVICE

20.1  ASSISTANCE

This manual provides instructions for the use of the machine and for its 

routine maintenance.

For extraordinary maintenance, for all operations requiring technical 

skills and expertise, please contact your authorised Grillo dealer.

20.2  IDENTIFICATION DATA

If it is necessary to contact an authorised service centre, for maintenance 

information, always provide:

machine model

 ........................................................................................

serial number ...........................................................................................

The machine’s serial number plate is located on the left-hand side of the 

frame (fig. 39).

Fig. 39

Machine model

Serial number

We advise the customer to note down this additional information in 

the spaces below. It may be useful for the service department.

PURCHASE DATE ....................................................................................
GRILLO DEALER ......................................................................................

20.3  SPARE PARTS

It is recommended to use only genuine spare parts to ensure product 

safety and durability.

20.4  WARRANTY

The warranty is provided in the manner and within the limits specified 

by current law. The retailer must hand over the machine’s warranty 

certificate to the end customer, printing a copy of the registration from the 

Grillo website. Transport, servicing and wear parts remain at customer’s 

expense. Any tampering or improper use not specifically authorised by 

Grillo will invalidate the warranty.

The engine follows the conditions specified by its manufacturer.

20.5  HOW TO ORDER SPARE PARTS

Contact our authorised centres.

Please indicate the serial number of the machine and the code of the 

component to be replaced.

It is possible to identify the part number by consulting the Grillo website: 

the spare parts tables of the machine will be available by entering the 

serial number.

21.  TRANSPORT WARNINGS

 CAUTION: make sure the engine is switched off.

l

ifting

 

And

 

trAnsport

The GH 9 may not be driven on public roads. If the machine is loaded 

onto a transport vehicle, secure it properly with ropes and lower the 

handlebar if necessary. When lifting, ensure that cranes, hoists and ropes 

have sufficient lifting capacity for the weight of the machine.

22.  DISPOSAL

Waste  products  such  as  waste  oil  or  fuel,  used  lubricants,  filters,  or 

other such consumable parts can cause harm to people, animals and 

the environment. They must therefore be disposed of properly. Contact a 

recycling centre or your retailer for information on correct disposal.

Summary of Contents for GH 9

























Reviews: