21
Rotisserie Instructions
Rot. Screw#10-24x3/4"
UNC with
washers and nuts
Motor Bracket
O u t s i d e
o f
r i g h t
grill bowl panel
1.
2.
Rot. Screw #10-24x3/4" UNC x2
Rot. Washer x2
Rot. Nut #10-24 x2
Washer
#10-24 Nut.
Remove all components from the carton.
Attach the Motor Bracket on the outside of the left grill bowl panel. Align the two holes of the
Bracket with the threaded holes on the grill bowl. Tighten securely using two Rot. Screws No.10-
24x3/4" UNC, Flat Washers and Nuts provided.
Rot.Collar
Holding Forks
Thumbscr ew
1/4"x1/2"
Spit
to accommodate your food, then tighten the Thumbscrews to keep the Holding Forks in position.
Slide the Rot.Collar onto to the threaded end of the Spit. Do not tighten the Roti. Collar until the
Rotisserie placed into your grill.
S
l
ide a Holding Fork onto each end of the Rotisserie Spit. Adjust spacing between Holding Fork
3.
Rot.Thumbscrew
1/4
"x1/2" x2
