2. SAFETY AND GENERAL SAFETY INFORMATION
2.1 USAGE AND MAINTENANCE ADVICE
In this manual we have considered all routine maintenance operations.
We advise you not to carry out any other working, repair or intervention than the ones envisaged in this
manual.
We suggest that you keep this manual with care and in a location where it can easily be found and con-
sulted by the operator.
2.2 MACHINE IDENTIFICATION
The machine can be identified by means of the information written on the plate located in the front of the
machine on the left-hand side. When spare parts are ordered or advice is required to operate the ma-
chine or to carry out maintenance operations, always indicate the machine’s model number written on
the plate, as well as voltage and nationality.
It is absolutely forbidden to remove the plate or to change the information written on it.
On the Boring machine described in this manual, the following plate has been attached:
1. CONFORMITY STATEMENT
Griggio S.p.A. declares that this Boring machine has been manufactured accurately, by using the best
techniques available to manufacture a quality product. We also declare that our boring machine com-
plies with EEC 89/392 Machines Guideline, as well as with the following standards:
EN 292/1
EN 292/2
EN 60240
EN 60240/1
EN 73/23 CE
IEC 408
The machine is hence commercialised with
conformity mark:
GRIGGIO S.p.A.
Via Cà Brion,40 - 35011
Reschigliano (PD) ITALY
The President
GRIGGIO S.p.A.
WOODWORKING MACHINERY
4
Summary of Contents for GF 21
