Griesbach Diamond H2O LINQ DLS-120-100, Product Manual

Page: 9 / 21

Diamond LINQ Softener Single Tank Product Manual
pg. 8
4. Connect the brine tank.
A. Remove the ties on the brine line hose (included in the brine tank).
B. Remove the well cap and connect one end of the brine line hose to
the brine line connection (Shown in Figure 14) of the brine tank.
Tighten the brine line hose to the brine line connection by turning
the cap of the brine line connection clockwise by hand. Make sure
that no air can get into the line, or the softener will not regenerate
properly.
C. Attach the brine line to the valve’s brine inlet shown in figure 15.
D. Safely dispose of any leftover tubing.
E. Fill the brine tank with salt.
Figure 13: Brine Tank
Diagram
Figure 14: Brine Well Picture
Brine Line Connection
Well Cap
Figure 15: Control Valve Diagram
Brine Inlet
Drain Outlet
Valve Inlet
Valve Outlet