background image

USE INSTRUCTION MANUAL 

FOR MATERIALS HANDLING

A two person fall protection anchorage device for use on steel structures

covered by grid mesh, allowing workers to work directly below the platform.

This manual should be used as part of an employee training program.

DESCRIPTION:

The Gridmesh Anchor (GMA) is designed to be a part of a hauling system for use on suitable steel 

structures that are covered by trafficable gridmesh.  This application might typically be in processing plants, 

on oil rigs and other applications in chemical plants, mining and oil & gas industries.

Gridmesh anchors do not place any load on the trafficable areas of the walkway in a way that would 

damage it. Issues such as sagging or bending by placing higher loads is avoided as the GMA design will 

direct any impact loads directly into the structure to which the mesh is attached. This ensures that the GMA 

will place no more load than would otherwise be directed under traffic conditions or if using alternative 

means of access such as rope access systems. 

WARNING: 

This product is part of a hauling system for materials handling. The user must follow  

the manufacturer’s instructions for each component of the system. These instructions must be 

provided to the user of this equipment. The user must read and understand these instructions  

before using this equipment. Manufacturer’s instructions must be followed for proper use and 

maintenance of this equipment. Alterations or misuse of this product or failure to follow instructions 

may result in serious injury or death. 

IMPORTANT: 

If you have questions on the use, care, or suitability of this equipment for your 

application, contact Gridmesh Anchor.

 

IMPORTANT: 

Before using this equipment, record the product identification information from the 

ID label in the Inspection and Maintenance Log of this manual, or in a suitable equipment register.

Form No:  

IFUGMA03-04

Rev: A

© Copyright 2019, Gridmesh Anchor

 GRIDMESH ANCHOR 

Model Numbers: 

GA03, GA04

!

 

i

 

 

i

 

Summary of Contents for GA03



















Reviews: