GRIDMESH ANCHOR GA03 User Instruction Manual Download Page 15

Page: 15 / 18

6. Lower the rope tag line ‘sling first’ through the

GMA base and the slot in the gridmesh. It may

be necessary to squeeze the eye of the sling so

that it fits through the mesh.

7. Once lowered, the worker below should connect

a chain block or block & tackle to the sling.

They should also ensure that there is sufficient

load line chain available to be connected to the

load once the device is raised into position.

8. Haul the sling with chainblock/block & tackle

attached by pulling the rope back through

the gridmesh, such that the end of the sling

protrudes through the gridmesh and the base

of the GMA.

9. Slide the GMA beam end through the sling

and slide into position in the base, such that

the beam can rest into its operating position

within the GMA base. The chain block / block

& tackle is now set for use.

Summary of Contents for GA03



















Search results

Summary of Contents for GA03

Reviews:

Related manuals for GA03

Brands by name

Popular brands

GRIDMESH ANCHOR GA03, User Instruction Manual

Search results

Summary of Contents for GA03

Reviews:

Related manuals for GA03

Brands by name

Popular brands