Weight and Dimension of SR-G series Grid Tie Power Inve
Do not attempt to repair the SR-G Grid Tie Inverter, it conta
following troubleshooting steps if the SR-G Grid Tie Power Syst
user-serviceable parts. If it fails, please contact Factory's custome
26
Troubleshooting
After all installation step described throughout this manual, Qualified personnel can use the
em does not operate
correctly.
WARNING:
ins no
r service to
obtain an RMA number and start the replacement process.
Status LED Indications and Error Reporting
Each grid tie inverter has a red LED that indicates status as follows:
a) When the red LED is on all time, this indicates that the AC output cables is not
connected with the utility grid, or the AC voltage or frequence of the utility grid is out of
the range of the specification of the inverter.
Please check the AC cables and the outlet of the utility grid, you can use a multi-meter
to measure the AC voltage or frequency, then you can judge what’s wrong about the AC
output.
b) When this red LED is flashing slowly, this indicates that the DC input voltage is too low
or the DC connection is not good. You should measure the output voltage of solar panel
or solar panel array.
c) when this red LED is flashing fastly, this indicates that the DC input voltage is too high,
you should adjust the connecting method according to the descripition in this manual.
WARNING: Never disconnect the DC wire connectors under load. Ensure that no
current is flowing in the DC wires prior to disconnecting. An opaque covering may be
used to cover the module prior to disconnecting the module.
rter
Net Weight
1.6Kg
3.6Kg
4.5Kg
6.2Kg
7.0Kg
Gross Weight 1.8Kg 3.8Kg 4.8Kg 6.6Kg 7.5Kg
Dimension(Package)
245mm×215mm×85mm
335mm×270mm×140mm
400mm×270mm×140mm
470mm×290mm×140mm
520mm×310mm×160mm
SR-250-G-X-X
SR-300-G-X-X
model
SR-500-G-X-X
SR-600-G-X-X
SR-1000-G-X-X SR-1500-G-X-X SR-2000-G-X-X