background image

 

PRINTED IN C

ANAD

A       

Page  4

SPECIFICATIONS

GENERAL

Sensing Element .................. Various thermistors and RTD's

Sensor Accuracy ...................

Thermistors:

 ±0.2°C (±0.36°F) @ 25°C (77°F)

 

Platinum RTD's:

 ±0.3°C (±0.54°F) @ 0°C (32°F)

 

Nickel RTD's:

 ±0.4°C (±0.72°F) @ 0°C (32°F)

Operating Conditions ........ 0 to 50°C (32 to 122°F)

Wiring Connections ............ Screw terminal block (14 to 22 AWG)

 

Sensor only: Pigtail, 2 or 3 wire

Enclosure ................................ White ABS, IP30 (NEMA 1)

 

84mm W x 119mm H x 29mm D (3.3" x 4.7" x 1.15")

Country of Origin ...................Canada

OVERRIDE SWITCH

Switch Type ............................ Front panel, momentary push-button,

 

N.O., SPST, 50 mA @ 12 Vdc

FAN SPEED SWITCH

Range ....................................... Auto, Off, Low, Medium, High

Signal .......................................

Resistance:

 2K, 4K, 6K, 8K, and 10K Ω standard

 

(custom ranges available)

SET-POINT SLIDE POT

Range ....................................... Front panel pot as resistive output, 20 to 20K Ω

Custom Spans Available ....1K, 2K, 5K, 10K, or 20K Ω

OCCUPIED INPUT

Signal Type ...............................Digital input, 0-5 Vdc, active low

Action .........................................Causes "OCC" segment to light on LCD

LED INPUT

Signal Type ...............................Active high, low, or 2 wire, 5 V current limit standard

LED Colors ................................Red, Green, or Yellow

Power Supply ........................ 5 Vdc standard, 10 Vdc or 24 Vdc optional

LCD DISPLAY

Power Supply ..........................12-24 Vdc / 24 Vac ± 10%

Consumption @ 24 Vdc .......13 mA max (no backlight) 23 mA max (with backlight)

Protection Circuitry ...............Reverse voltage protected

Range .........................................0.0-35.0°C or 32.0-95.0°F

 

jumper selectable

Resolution ................................0.1°C/°F

Display Size ..............................38.1mm W x 16.5mm H (1.5" x 0.65")

Digit Height .............................11.43mm (0.45")

Symbols .....................................°C, °F, OCC

Backlight ...................................Enable or disable via jumper

84 mm

3.3“

119 mm

4.7“

29 mm

1.15 “

82.6 mm

3.25 “

58 mm

2.3 “

DIMENSIONS

IN-GE-TSRCXXX-01 04/20

Copyright © Greystone Energy Systems, Inc.   All Rights Reserved    Phone:  +1 506 853 3057  Web: www.greystoneenergy.com

Summary of Contents for TSRC Series

Page 1: ... at the top edge and must be removed from the bottom edge first Use a small Phillips screwdriver to loosen the security screw as shown in Figure 1 Complete removal is not required Use a screw driver to carefully pry each bottom corner if necessary Tip the cover away from the base and sit it aside as shown in Figure 2 SENSOR ONLY Feed at least 6 inches of wire through the wall and out of the juncti...

Page 2: ...s mounted on the wall For added protection place the PCB in the supplied anti static bag Mount the base by screwing it to an electrical box or directly to the wall as shown in Figure 5 After the base is screwed to an electrical box or the wall using the appropriate holes remove the PCB from the anti static bag feed connection wires through center hole and place the top of the PCB into the PCB hold...

Page 3: ... LED The LED is typically used as indication as when manual override has been selected It is available on the LED and LED terminals and requires 5 Vdc to power The LED option is not available when LCD installed FAN SPEED SWITCH The 5 position speed fan speed has a resistance output signal on the FAN and FAN terminals and has different resistances for each position 5 positions Auto Off Low Mid High...

Page 4: ...ot as resistive output 20 to 20K Ω Custom Spans Available 1K 2K 5K 10K or 20K Ω OCCUPIED INPUT Signal Type Digital input 0 5 Vdc active low Action Causes OCC segment to light on LCD LED INPUT Signal Type Active high low or 2 wire 5 V current limit standard LED Colors Red Green or Yellow Power Supply 5 Vdc standard 10 Vdc or 24 Vdc optional LCD DISPLAY Power Supply 12 24 Vdc 24 Vac 10 Consumption 2...

Reviews: